企业信息 > 建材 > 企业资讯

-邵阳 铝镁锰板-湘潭 铝镁锰板-长沙 铝镁锰板!

发布时间:2019-03-29 19:30:41

-邵阳 铝镁锰板-湘潭 铝镁锰板-长沙 铝镁锰板!

Standing seam roof panel is also called aluminium magnesium manganese roof panel, the plate rib erect, so the drainage section is almost

not affected by the influence of ribbed plate, so the effective drainage section more than ordinary plate, and the plate rib high 65mm.

can ensure the waterproof performance of the roof panel in the case of the steep slope, the elastic modulus Aluminum Alloy small. On the roof of adaptable two-way winding. The standing seam fixing method to fundamentally eliminate the risk of traditional screw fixation method Water Leakage penetration brings. Standing seam roof panel is fixed,

the first is the Aluminum Alloy fixed seat with stainless steel screws on galvanized steel purlin flange, the roof panel button in wobbler Aluminum Alloy fixed seat on the end of

electric sewing machine will lap roof edge bite together. Because the standing seam roof without screw fixation method, revealed that the entire roof is not only beautiful,

neat, and eliminate the risk of Water Leakage tens of thousands of screw holes caused by. 直立锁边屋面板也叫铝镁锰屋面板,其板肋直立,所以排水断面几乎不受板肋影响,因而有效排水截面较普通板型更大,加之板肋较高65mm.更能确保屋面板在斜度陡峭情

况下的防水性能,由于铝合金的弹性模量小,对双向曲折的屋面适应性更强。 选用直立锁边固定方法,从根本上杜绝了传统螺钉穿透固定方法带来的漏水危险。直立锁边屋面板的固定,首先是将铝合金固定座用高强不锈钢螺钉固定于镀锌檩条上翼缘

,再将屋面板扣在铝合金固定座的梅花头上,最终用电动锁边机将屋面板的搭接边咬合在一起。因为选用了直立锁边固定方法,屋面没有螺钉显露,全部屋面不光漂亮、整齐,

并且杜绝了成千上万个螺钉孔造成的漏水危险。

文章来源: http://bbs.shm.com.cn/xinxi/33460908.html 转载请注明出处